PartsTable
Technical Data Sheet
Download PDF

D4-AJW5-110SSPSNA — STUD,TURNLOCK FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

D4-AJW5-110SSPSNA: STUD,TURNLOCK FASTENER.

The STUD,TURNLOCK FASTENER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 HEAD, grip_length: 1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN, head_length: 1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN, stud_head_height: 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN, shank_neck_length: 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-471-0405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D4-AJW5-110SSPSNA
NSN: 5325-00-471-0405
FSC: 5325 — Fastening Devices
CAGE: 72794 — SOUTHCO INC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 HEAD
grip_length1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN
head_length1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
stud_head_height0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
shank_neck_length0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
securing_device_typeGROMMET
turnlock_stud_head_styleFILLISTER WING
stud_shank_major_diameter0.307 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
turnlock_stud_shank_styleSTUD SHANK
material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE HEAD
surface_treatment_document_and_classificationMIL-STD-171 FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
NSN5325-00-471-0405
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: D4-AJW5-110SSPSNA · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-171 FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
HEAD LENGTH: 1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
•
TURNLOCK STUD SHANK STYLE: STUD SHANK
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE HEAD
•
STUD HEAD HEIGHT: 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
•
SHANK NECK LENGTH: 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
•
SECURING DEVICE TYPE: GROMMET
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-STD-171 FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
HEAD LENGTH1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
TURNLOCK STUD SHANK STYLESTUD SHANK
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE HEAD
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE STUD
STUD HEAD HEIGHT0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
SHANK NECK LENGTH0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
SECURING DEVICE TYPEGROMMET
TURNLOCK STUD HEAD STYLEFILLISTER WING
STUD SHANK MAJOR DIAMETER0.307 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5325 — Fastening Devices
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5325-00-000-1884 5325-00-000-9988 5325-00-001-1567 5325-00-001-2043 5325-00-001-3842 5325-00-001-3858 5325-00-001-3871 5325-00-001-4317
SUBSTITUTES & CROSS-REFERENCES 3
AJW5-110SSPSReference document
Same NSN cross-reference
Reference document — Design control — primary reference
9175663-3Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
121J-W5110-SS-PASReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D4-AJW5-110SSPSNA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D4-AJW5-110SSPSNA?
D4-AJW5-110SSPSNA is a STUD,TURNLOCK FASTENER.
What parts can replace D4-AJW5-110SSPSNA?
There are 3 known substitutes for D4-AJW5-110SSPSNA: AJW5-110SSPS, 9175663-3, 121J-W5110-SS-PAS. Substitute compatibility should be verified for your specific system.
What is the NSN for D4-AJW5-110SSPSNA?
D4-AJW5-110SSPSNA is cataloged in the U.S. Government catalog under NSN 5325-00-471-0405. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D4-AJW5-110SSPSNA

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.