PartsTable
Technical Data Sheet
Download PDF

D4-140 CAD PLAT A — WASHER,SADDLE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

D4-140 CAD PLAT A: WASHER,SADDLE.

The WASHER,SADDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.139 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, overall_width: 0.417 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN, heat_treatment: AS FABRICATED, overall_height: 0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, overall_length: 0.391 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-880-9200, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D4-140 CAD PLAT A
NSN: 5310-00-880-9200
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.139 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
overall_width0.417 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
heat_treatmentAS FABRICATED
overall_height0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
overall_length0.391 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
style_designatorSADDLE
surface_treatmentCADMIUM OVERALL
material_document_and_classificationQQ-S-698,COND CRCQ FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-880-9200
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D4-140 CAD PLAT A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HEAT TREATMENT: AS FABRICATED
•
STYLE DESIGNATOR: SADDLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698,COND CRCQ FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAT TREATMENTAS FABRICATED
STYLE DESIGNATORSADDLE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698,COND CRCQ FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.391 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
OVERALL WIDTH0.417 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.139 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
D4-140CADPLATEIReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D4-140CAD PLATE IRIDESCENT YELLOReference document
Same NSN cross-reference
Reference document — Secondary reference
1481494-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D4-140 CAD PLAT A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D4-140 CAD PLAT A?
D4-140 CAD PLAT A is a WASHER,SADDLE.
What parts can replace D4-140 CAD PLAT A?
There are 3 known substitutes for D4-140 CAD PLAT A: D4-140CADPLATEI, D4-140CAD PLATE IRIDESCENT YELLO, 1481494-2. Substitute compatibility should be verified for your specific system.
What is the NSN for D4-140 CAD PLAT A?
D4-140 CAD PLAT A is cataloged in the U.S. Government catalog under NSN 5310-00-880-9200. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D4-140 CAD PLAT A