PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D38328
D38328 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.802 INCHES NOMINAL IN, style_designator: TWO PIECE, material_diameter: 0.312 INCHES NOMINAL IN, surface_treatment: CADMIUM OR ZINC BAND, loop_inside_diameter: 2.875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-105-7840, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D38328
NSN: 5340-00-105-7840
FSC: 5340
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL BAND
overall_width0.802 INCHES NOMINAL IN
style_designatorTWO PIECE
material_diameter0.312 INCHES NOMINAL IN
surface_treatmentCADMIUM OR ZINC BAND
loop_inside_diameter2.875 INCHES NOMINAL IN
integral_nut_type_and_quantity2 PLAIN EQUAL LENGTH TONGUES
NSN5340-00-105-7840
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D38328 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 2.875 INCHES NOMINAL IN
•
MATERIAL DIAMETER: 0.312 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC BAND
•
STYLE DESIGNATOR: TWO PIECE
•
INTEGRAL NUT TYPE AND QUANTITY: 2 PLAIN EQUAL LENGTH TONGUES
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER2.875 INCHES NOMINAL IN
OVERALL WIDTH0.802 INCHES NOMINAL IN
MATERIAL DIAMETER0.312 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC BAND
STYLE DESIGNATORTWO PIECE
INTEGRAL NUT TYPE AND QUANTITY2 PLAIN EQUAL LENGTH TONGUES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
683AS-15Interchangeable
interchangeable cross-reference
interchangeable
170-004-0026Interchangeable
interchangeable cross-reference
interchangeable
L-683-AS15Interchangeable
interchangeable cross-reference
interchangeable
827487Interchangeable
interchangeable cross-reference
interchangeable
706883Interchangeable
interchangeable cross-reference
interchangeable
307771Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D38328?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D38328?
D38328 is a CLAMP,LOOP.
What parts can replace D38328?
There are 24 known substitutes for D38328: 683AS-15, 170-004-0026, L-683-AS15 and 21 more. Substitute compatibility should be verified for your specific system.
Is D38328 still available?
D38328 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D38328

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026