PartsTable
Technical Data Sheet
Download PDF

D3772 — BEARING,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

D3772: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, nut_style: CLINCH, nut_height: 0.300 INCHES NOMINAL IN, nut_diameter: 0.225 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN, pilot_length: 0.050 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-655-9594, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D3772
NSN: 5310-00-655-9594
NIINs: 006559594, 011971027
FSC: 5310 — Nuts and Washers
CAGE: 86835 — RULAND MFG CO INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
nut_styleCLINCH
nut_height0.300 INCHES NOMINAL IN
nut_diameter0.225 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
pilot_length0.050 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.225 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.138 INCHES IN
NSN5310-00-655-9594
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D3772 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM CENTERLINE TO FLAT: 0.114 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
NUT DIAMETER: 0.225 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.225 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.050 INCHES NOMINAL IN
•
NUT HEIGHT: 0.300 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM CENTERLINE TO FLAT0.114 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
NUT DIAMETER0.225 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
PILOT DIAMETER0.225 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
PILOT LENGTH0.050 INCHES NOMINAL IN
NUT HEIGHT0.300 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLECLINCH
SUBSTITUTES & CROSS-REFERENCES 2
364-1015P1Reference document
Same NSN cross-reference
Reference document — Secondary reference
9072706Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy D3772?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D3772?
D3772 is a BEARING,SLEEVE.
What parts can replace D3772?
There are 2 known substitutes for D3772: 364-1015P1, 9072706. Substitute compatibility should be verified for your specific system.
What is the NSN for D3772?
D3772 is cataloged in the U.S. Government catalog under NSN 5310-00-655-9594. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D3772

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.