PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D35-991-2402 REV E REF #62

D35-991-2402 REV E REF #62 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT, case_style: RECESSED, seal_width: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 2.754 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-132-4740, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D35-991-2402 REV E REF #62
NSN: 5330-00-132-4740
FSC: 5330
CAGE: 59776 — WANNER ENGINEERING INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
case_styleRECESSED
seal_width0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter2.754 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.750 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-132-4740
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D35-991-2402 REV E REF #62 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 2.750 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
CASE STYLE: RECESSED
•
SEALING ELEMENT STYLE: ANGULAR
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
SEAL WIDTH: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.750 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
CASE STYLERECESSED
SEALING ELEMENT STYLEANGULAR
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
SEAL WIDTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER2.754 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
537.8125Interchangeable
interchangeable cross-reference
interchangeable
50-10158Interchangeable
interchangeable cross-reference
interchangeable
224C-13/16Interchangeable
interchangeable cross-reference
interchangeable
31256Interchangeable
interchangeable cross-reference
interchangeable
19832Interchangeable
interchangeable cross-reference
interchangeable
4228-0119Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D35-991-2402 REV E REF #62?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D35-991-2402 REV E REF #62?
D35-991-2402 REV E REF #62 is a SEAL,PLAIN ENCASED.
What parts can replace D35-991-2402 REV E REF #62?
There are 15 known substitutes for D35-991-2402 REV E REF #62: 537.8125, 50-10158, 224C-13/16 and 12 more. Substitute compatibility should be verified for your specific system.
Is D35-991-2402 REV E REF #62 still available?
D35-991-2402 REV E REF #62 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D35-991-2402 REV E REF #62

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026