PartsTable
Technical Data Sheet
Download PDF

D34004993-204 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

D34004993-204: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE RETAINER, bore_shape: STRAIGHT, bore_diameter: 1.8119 INCHES MINIMUM AND 1.8123 INCHES MAXIMUM IN, overall_width: 0.2500 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-104-4334, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D34004993-204
NSN: 3110-01-104-4334
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 09128 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE RETAINER
bore_shapeSTRAIGHT
bore_diameter1.8119 INCHES MINIMUM AND 1.8123 INCHES MAXIMUM IN
overall_width0.2500 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
special_featuresBEARING PKG NOT TO BE OPENED IN AREAS OTHER THAN DESIG CLEAN ROOMS
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
internal_clearance0.0010 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL IN
overall_outside_diameter2.2498 INCHES NOMINAL IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO. 5P
NSN3110-01-104-4334
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D34004993-204 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL CLEARANCE: 0.0010 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 2.2498 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL CLEARANCE0.0010 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH0.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.2498 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
SPECIAL FEATURESBEARING PKG NOT TO BE OPENED IN AREAS OTHER THAN DESIG CLEAN ROOMS
STANDARD TOLERANCE DESIGNATIONABEC NO. 5P
SUBSTITUTES & CROSS-REFERENCES 1
SR544B3F8T14C12K1216Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D34004993-204?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D34004993-204?
D34004993-204 is a BEARING,BALL,ANNULAR.
What parts can replace D34004993-204?
There is 1 known substitute for D34004993-204: SR544B3F8T14C12K1216. Substitute compatibility should be verified for your specific system.
What is the NSN for D34004993-204?
D34004993-204 is cataloged in the U.S. Government catalog under NSN 3110-01-104-4334. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D34004993-204

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.