PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D33415

D33415 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 1.5000 INCHES NOMINAL IN, cone_width: 1.8900 INCHES NOMINAL IN, bore_diameter: 3.5000 INCHES NOMINAL IN, overall_width: 1.8750 INCHES NOMINAL IN, standout_width: 0.3750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-100-4416, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D33415
NSN: 3110-00-100-4416
FSC: 3110
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width1.5000 INCHES NOMINAL IN
cone_width1.8900 INCHES NOMINAL IN
bore_diameter3.5000 INCHES NOMINAL IN
overall_width1.8750 INCHES NOMINAL IN
standout_width0.3750 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.1900 INCHES NOMINAL IN
backface_corner_radius0.1300 INCHES NOMINAL IN
overall_outside_diameter7.1250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-4416
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D33415 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.8900 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 7.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
CUP WIDTH: 1.5000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1300 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.3750 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CONE WIDTH1.8900 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER7.1250 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
CUP WIDTH1.5000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1300 INCHES NOMINAL IN
STANDOUT WIDTH0.3750 INCHES NOMINAL IN
BORE DIAMETER3.5000 INCHES NOMINAL IN
CONE CORNER RADIUS0.1900 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
33-415InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
D52EE524TFInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
D52EE054TFInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
D3739InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
TP1001InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FS1212InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D33415?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D33415?
D33415 is a BEARING,ROLLER,TAPERED.
What parts can replace D33415?
There are 12 known substitutes for D33415: 33-415, D52EE524TF, D52EE054TF and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D33415?
D33415 is cataloged in the Federal Logistics Information System under NSN 3110-00-100-4416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D33415

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026