PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D3332
D3332 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.875 INCHES NOMINAL IN, aperture_width: 0.656 INCHES NOMINAL IN, overall_length: 3.531 INCHES NOMINAL IN, aperture_length: 2.625 INCHES NOMINAL IN, inside_corner_radius: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-407-3698, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D3332
NSN: 5330-00-407-3698
FSC: 5330
CAGE: 14100 — STROMBERG-CARLSON CORP A PLESSEY TELECOMMUNICATIONS CO (USA)
SPECIFICATIONS
hole_diameter0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.875 INCHES NOMINAL IN
aperture_width0.656 INCHES NOMINAL IN
overall_length3.531 INCHES NOMINAL IN
aperture_length2.625 INCHES NOMINAL IN
inside_corner_radius0.094 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
center_to_center_distance_between_bolt_holes_along_length3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-407-3698
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D3332 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.094 INCHES NOMINAL IN
•
APERTURE WIDTH: 0.656 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH3.531 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH0.875 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.094 INCHES NOMINAL IN
APERTURE WIDTH0.656 INCHES NOMINAL IN
APERTURE LENGTH2.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
204929Interchangeable
interchangeable cross-reference
interchangeable
07-203332Interchangeable
interchangeable cross-reference
interchangeable
333-2Interchangeable
interchangeable cross-reference
interchangeable
125008-39Interchangeable
interchangeable cross-reference
interchangeable
333-093Interchangeable
interchangeable cross-reference
interchangeable
520-007-04Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D3332?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D3332?
D3332 is a GASKET.
What parts can replace D3332?
There are 16 known substitutes for D3332: 204929, 07-203332, 333-2 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D3332?
D3332 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-407-3698. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D3332

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026