PartsTable
Technical Data Sheet
PartsTable / O-RING / D3115458A
D3115458A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 7.645 INCHES NOMINAL IN, center_hole_diameter: 7.180 INCHES MINIMUM AND 7.270 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-006-0324, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D3115458A
NSN: 5331-01-006-0324
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter7.645 INCHES NOMINAL IN
center_hole_diameter7.180 INCHES MINIMUM AND 7.270 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
end_item_identificationDIESEL ENGINE
NSN5331-01-006-0324
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D3115458A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 7.180 INCHES MINIMUM AND 7.270 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 7.645 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER7.180 INCHES MINIMUM AND 7.270 INCHES MAXIMUM IN
OUTSIDE DIAMETER7.645 INCHES NOMINAL IN
ELONGATION PERCENTAGE125 MAXIMUM
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
M83248/1-912Interchangeable
interchangeable cross-reference
interchangeable
516-5486651-F70Interchangeable
interchangeable cross-reference
interchangeable
04052333002424Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-910Interchangeable
interchangeable cross-reference
interchangeable
137.000.825Interchangeable
interchangeable cross-reference
interchangeable
6V-4589Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D3115458A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D3115458A?
D3115458A is a O-RING.
What parts can replace D3115458A?
There are 30 known substitutes for D3115458A: M83248/1-912, 516-5486651-F70, 04052333002424 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D3115458A?
D3115458A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-006-0324. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D3115458A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026