D3113437A — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

D3113437A: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.068 INCHES NOMINAL IN, center_hole_diameter: 1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-990-3979, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

D3113437A

NSN: 5331-00-990-3979
FSC: 5331 — O-ring
CAGE: 0VP52 — FINCANTIERI MARINE SYSTEMS NORTH AMERICA, INC. DBA FINCANTIERI MARINE SYSTEMS NORTH AM (USA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
temp_rating	-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	2.068 INCHES NOMINAL IN
center_hole_diameter	1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-00-990-3979

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 2.068 INCHES NOMINAL IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

TEMP RATING	-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	2.068 INCHES NOMINAL IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	1.852 INCHES MINIMUM AND 1.872 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 4

MS9068-134Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS3582Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-134S604-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS3582-134Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy D3113437A?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is D3113437A?

D3113437A is a O-RING.

What parts can replace D3113437A?

There are 4 known substitutes for D3113437A: MS9068-134, SAE-AS3582, 2-134S604-70 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for D3113437A?

D3113437A is cataloged in the U.S. Government catalog under NSN 5331-00-990-3979. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

D3113437A — O-RING

Request a Quote — D3113437A