PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D3054
D3054 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM AND COPPER ALLOY, outside_diameter: 0.594 INCHES NOMINAL IN, special_features: VULCANIZED FIBER MATERIAL O/A; LUBRICATION MATERIAL GRAPHITE, aperture_diameter: 0.378 INCHES MINIMUM AND 0.382 INCHES MAXIMUM IN, cross-sectional_thickness: 0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-4465, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D3054
NSN: 5330-00-599-4465
FSC: 5330
CAGE: 55469 — ESSEX INDUSTRIES, INC. DBA ESSEX INDUSTRIES (USA)
SPECIFICATIONS
materialALUMINUM AND COPPER ALLOY
outside_diameter0.594 INCHES NOMINAL IN
special_featuresVULCANIZED FIBER MATERIAL O/A; LUBRICATION MATERIAL GRAPHITE
aperture_diameter0.378 INCHES MINIMUM AND 0.382 INCHES MAXIMUM IN
cross-sectional_thickness0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
NSN5330-00-599-4465
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D3054 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 0.378 INCHES MINIMUM AND 0.382 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.594 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER0.378 INCHES MINIMUM AND 0.382 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.594 INCHES NOMINAL IN
SPECIAL FEATURESVULCANIZED FIBER MATERIAL O/A; LUBRICATION MATERIAL GRAPHITE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
BA714032Interchangeable
interchangeable cross-reference
interchangeable
WA528Interchangeable
interchangeable cross-reference
interchangeable
D3-054Interchangeable
interchangeable cross-reference
interchangeable
1290Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D3054?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D3054?
D3054 is a GASKET.
What parts can replace D3054?
There are 4 known substitutes for D3054: BA714032, WA528, D3-054 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D3054?
D3054 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-4465. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D3054

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026