PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D301122 PIECE 22
D301122 PIECE 22 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, stud_length: 1.0000 INCHES NOMINAL IN, thread_class: 2A A, stud_diameter: 0.4375 INCHES NOMINAL IN, thread_length: 0.5000 INCHES NOMINAL IN, overall_length: 1.6562 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-039-7602, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D301122 PIECE 22
NSN: 3110-01-039-7602
FSC: 3110
CAGE: 3X894 — CONTROL FLOW, INC. DBA CONTROL FLOW INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
stud_length1.0000 INCHES NOMINAL IN
thread_class2A A
stud_diameter0.4375 INCHES NOMINAL IN
thread_length0.5000 INCHES NOMINAL IN
overall_length1.6562 INCHES NOMINAL IN
outer_ring_width0.6250 INCHES NOMINAL IN
special_features0.2500 IN. HEX HOLE IN
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
nominal_thread_size0.438 INCHES IN
lubrication_materialLUBRICANT
NSN3110-01-039-7602
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D301122 PIECE 22 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CAM FOLLOWER
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UNF
•
STUD DIAMETER: 0.4375 INCHES NOMINAL IN
•
STUD LENGTH: 1.0000 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 20
•
OUTER RING WIDTH: 0.6250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCAM FOLLOWER
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNF
OVERALL LENGTH1.6562 INCHES NOMINAL IN
STUD DIAMETER0.4375 INCHES NOMINAL IN
STUD LENGTH1.0000 INCHES NOMINAL IN
THREAD QUANTITY PER INCH20
OUTER RING WIDTH0.6250 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.438 INCHES IN
SPECIAL FEATURES0.2500 IN. HEX HOLE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
X61628B1Interchangeable
interchangeable cross-reference
interchangeable
CF1BInterchangeable
interchangeable cross-reference
interchangeable
CR-1-XB-211Interchangeable
interchangeable cross-reference
interchangeable
S32LInterchangeable
interchangeable cross-reference
interchangeable
CF-1-SBInterchangeable
interchangeable cross-reference
interchangeable
402169Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D301122 PIECE 22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D301122 PIECE 22?
D301122 PIECE 22 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace D301122 PIECE 22?
There are 8 known substitutes for D301122 PIECE 22: X61628B1, CF1B, CR-1-XB-211 and 5 more. Substitute compatibility should be verified for your specific system.
Is D301122 PIECE 22 still available?
D301122 PIECE 22 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D301122 PIECE 22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026