PartsTable
Technical Data Sheet

D301114 FIND NO 41 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.739 INCHES MINIMUM AND 1.785 INCHES MAXIMUM IN, center_hole_diameter: 1.478 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-297-9990, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D301114 FIND NO 41
NSN: 5331-00-297-9990
FSC: 5331 — O-RING
CAGE: 3X894 — CONTROL FLOW, INC. DBA CONTROL FLOW INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.739 INCHES MINIMUM AND 1.785 INCHES MAXIMUM IN
center_hole_diameter1.478 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-297-9990
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D301114 FIND NO 41 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.739 INCHES MINIMUM AND 1.785 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.478 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER1.739 INCHES MINIMUM AND 1.785 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.478 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 40
A28642InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
ARP568-222InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
ARP568-222MILG23652TYPE2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
000222EEInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1460-0022InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
146-27InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D301114 FIND NO 41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D301114 FIND NO 41?
D301114 FIND NO 41 is a O-RING.
What parts can replace D301114 FIND NO 41?
There are 40 known substitutes for D301114 FIND NO 41: A28642, ARP568-222, ARP568-222MILG23652TYPE2 and 37 more. Substitute compatibility should be verified for your specific system.
Is D301114 FIND NO 41 still available?
D301114 FIND NO 41 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D301114 FIND NO 41