PartsTable / COMPONENT / D2961-14-8
D2961-14-8
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The TURNBUCKLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, eye_width: 1.688 INCHES NOMINAL IN, body_style: ROUND OPEN BODY, body_length: 15.125 INCHES NOMINAL IN, thread_class: 1B BODY, take-up_distance: 12.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-291-8210, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
D2961-14-8
NSN: 5340-00-291-8210 FSC: 5340 CAGE: 13287 — AMCA INTL CORP AMCLYDE ENGINEERED PRODUCTS DIV
SPECIFICATIONS
material STEEL OVERALL eye_width 1.688 INCHES NOMINAL IN body_style ROUND OPEN BODY body_length 15.125 INCHES NOMINAL IN thread_class 1B BODY take-up_distance 12.000 INCHES NOMINAL IN lug_hole_diameter 2.125 INCHES NOMINAL IN surface_treatment ZINC OVERALL nominal_thread_size 1.250 INCHES BODY IN thread_series_designator UNIFIED NATIONAL COARSE (UNC) BODY nondefinitive_spec/std_data 4 CLASS AND 1 FORM AND 1 TYPE surface_treatment_document_and_classification ASTM A153 ASSN STD SINGLE TREATMENT RESPONSE OVERALL NSN 5340-00-291-8210
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: D2961-14-8
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• EYE WIDTH: 1.688 INCHES NOMINAL IN
• NONDEFINITIVE SPEC/STD DATA: 4 CLASS AND 1 FORM AND 1 TYPE
• TAKE-UP DISTANCE: 12.000 INCHES NOMINAL IN
• LUG HOLE DIAMETER: 2.125 INCHES NOMINAL IN
• NOMINAL THREAD SIZE: 1.250 INCHES BODY IN
• THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC) BODY
TECHNICAL CHARACTERISTICS (FLIS)
EYE WIDTH 1.688 INCHES NOMINAL IN NONDEFINITIVE SPEC/STD DATA 4 CLASS AND 1 FORM AND 1 TYPE MATERIAL STEEL OVERALL TAKE-UP DISTANCE 12.000 INCHES NOMINAL IN THREAD CLASS 1B BODY LUG HOLE DIAMETER 2.125 INCHES NOMINAL IN NOMINAL THREAD SIZE 1.250 INCHES BODY IN THREAD SERIES DESIGNATOR UNIFIED NATIONAL COARSE (UNC) BODY SURFACE TREATMENT ZINC OVERALL BODY STYLE ROUND OPEN BODY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
H43 Interchangeable interchangeable cross-reference
interchangeable
43405 Interchangeable interchangeable cross-reference
interchangeable
9902.24 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy D2961-14-8?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D2961-14-8?
D2961-14-8 is a TURNBUCKLE.
What parts can replace D2961-14-8?
There are 3 known substitutes for D2961-14-8: H43, 43405, 9902.24. Substitute compatibility should be verified for your specific system.
Is D2961-14-8 still available?
D2961-14-8 is currently cancelled.
Request a Quote — D2961-14-8