PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D29340PC35
D29340PC35 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.469 INCHES NOMINAL IN, housing_bore_diameter: 3.874 INCHES MINIMUM AND 3.881 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D29340PC35
NSN: 5330-00-154-8344
FSC: 5330
CAGE: 73057 — USM CORP SUB OF EMHART INDUSTRIES INC FARREL CO DIV (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.469 INCHES NOMINAL IN
housing_bore_diameter3.874 INCHES MINIMUM AND 3.881 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-8344
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D29340PC35 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
ACCOMMODATED SHAFT DIAMETER: 2.750 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.874 INCHES MINIMUM AND 3.881 INCHES MAXIMUM IN
•
MATERIAL: LEATHER SEALING ELEMENT
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER2.750 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.874 INCHES MINIMUM AND 3.881 INCHES MAXIMUM IN
MATERIALLEATHER SEALING ELEMENT
MATERIALSTEEL CASE
CASE STYLESQUARE
SEAL WIDTH0.469 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
250605Interchangeable
interchangeable cross-reference
interchangeable
WWP471Interchangeable
interchangeable cross-reference
interchangeable
WWP471BDQBUKJInterchangeable
interchangeable cross-reference
interchangeable
18T12Interchangeable
interchangeable cross-reference
interchangeable
125-59-1Interchangeable
interchangeable cross-reference
interchangeable
L193Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D29340PC35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D29340PC35?
D29340PC35 is a SEAL,PLAIN ENCASED.
What parts can replace D29340PC35?
There are 11 known substitutes for D29340PC35: 250605, WWP471, WWP471BDQBUKJ and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D29340PC35?
D29340PC35 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D29340PC35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026