PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D27380
D27380 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: GLASS OVERALL, joint_type: OVERLAP RETAINER, peripheral_diameter: 2.074 INCHES MAXIMUM IN, center_hole_diameter: 2.000 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN, cross-sectional_height: 0.587 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-097-5130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D27380
NSN: 5330-00-097-5130
FSC: 5330
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialGLASS OVERALL
joint_typeOVERLAP RETAINER
peripheral_diameter2.074 INCHES MAXIMUM IN
center_hole_diameter2.000 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
cross-sectional_height0.587 INCHES NOMINAL IN
NSN5330-00-097-5130
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D27380 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 2.074 INCHES MAXIMUM IN
•
MATERIAL: GLASS OVERALL
•
JOINT TYPE: OVERLAP RETAINER
•
CENTER HOLE DIAMETER: 2.000 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.587 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER2.074 INCHES MAXIMUM IN
MATERIALGLASS OVERALL
JOINT TYPEOVERLAP RETAINER
CENTER HOLE DIAMETER2.000 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.587 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
13213E4415-11Interchangeable
interchangeable cross-reference
interchangeable
M7472148REV8PT8Interchangeable
interchangeable cross-reference
interchangeable
58K802932Interchangeable
interchangeable cross-reference
interchangeable
64290Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D27380?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D27380?
D27380 is a RETAINER,PACKING.
What parts can replace D27380?
There are 4 known substitutes for D27380: 13213E4415-11, M7472148REV8PT8, 58K802932 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D27380?
D27380 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-097-5130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D27380

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026