PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D25
D25 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BLADDER,ACCUMULATOR,HYDRAULIC is a the manufacturer industrial component. Key specifications include material: CELLULOSE FILTERING MEDIUM, design_type: NONREUSABLE, body_diameter: 2.562 INCHES NOMINAL IN, alignment_type: RIGID, flow_direction: OUTSIDE IN, overall_height: 0.8125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8544, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D25
NSN: 3110-00-100-8544
FSC: 3110
CAGE: 03489 — ANDREWS BEARING CORP DIV OF MPB CORP SUB OF WHEELABRATOR-FRYE INC (USA)
SPECIFICATIONS
materialCELLULOSE FILTERING MEDIUM
design_typeNONREUSABLE
body_diameter2.562 INCHES NOMINAL IN
alignment_typeRIGID
flow_directionOUTSIDE IN
overall_height0.8125 INCHES NOMINAL IN
surface_finishGROUND
special_featuresSTERILE;NON-INVASIVE ARTERIAL MONITORING;USED ON ADULT'S FINGER;UNIT QTY 24
style_designatorCYLINDRICAL W/OUT CONTAINER
body_overall_length4.875 INCHES NOMINAL IN
differential_pressureERR-060
largest_bore_diameter2.0250 INCHES NOMINAL IN
NSN3110-00-100-8544
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D25 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LARGEST BORE DIAMETER: 2.0250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 3.3437 INCHES NOMINAL IN
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
BORE SMALLEST DIAMETER: 2.0000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LARGEST BORE DIAMETER2.0250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
ALIGNMENT TYPERIGID
SPECIAL FEATURESRETAINERLESS TYPE
OVERALL OUTSIDE DIAMETER3.3437 INCHES NOMINAL IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
BORE SMALLEST DIAMETER2.0000 INCHES NOMINAL IN
OVERALL HEIGHT0.8125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
E25Interchangeable
interchangeable cross-reference
interchangeable
EMM307Interchangeable
interchangeable cross-reference
interchangeable
F25-1Interchangeable
interchangeable cross-reference
interchangeable
PARC0DUCT1Interchangeable
interchangeable cross-reference
interchangeable
2FLEXIDUCTInterchangeable
interchangeable cross-reference
interchangeable
X81152.001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D25?
D25 is a BLADDER,ACCUMULATOR,HYDRAULIC.
What parts can replace D25?
There are 24 known substitutes for D25: E25, EMM307, F25-1 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D25?
D25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8544. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026