PartsTable
Technical Data Sheet
Download PDF

D24122LA — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D24122LA: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, gage_thickness: 0.062 INCHES NOMINAL IN, outside_diameter: 2.938 INCHES NOMINAL IN, aperture_diameter: 4.875 INCHES NOMINAL IN, center_to_center_distance: 0.156 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-298-6318, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D24122LA
NSN: 5330-00-298-6318
FSC: 5330 — Packing and Gasket Materials
CAGE: 23168 — HAMMEL DAHL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
gage_thickness0.062 INCHES NOMINAL IN
outside_diameter2.938 INCHES NOMINAL IN
aperture_diameter4.875 INCHES NOMINAL IN
center_to_center_distance0.156 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL
NSN5330-00-298-6318
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D24122LA MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL
•
OUTSIDE DIAMETER: 2.938 INCHES NOMINAL IN
•
APERTURE DIAMETER: 4.875 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CENTER TO CENTER DISTANCE: 0.156 INCHES NOMINAL IN
•
GAGE THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL
OUTSIDE DIAMETER2.938 INCHES NOMINAL IN
APERTURE DIAMETER4.875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CENTER TO CENTER DISTANCE0.156 INCHES NOMINAL IN
GAGE THICKNESS0.062 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
D24122MRAReference document
Same NSN cross-reference
Reference document — Design control — primary reference
D24122Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy D24122LA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D24122LA?
D24122LA is a GASKET.
What parts can replace D24122LA?
There are 2 known substitutes for D24122LA: D24122MRA, D24122. Substitute compatibility should be verified for your specific system.
What is the NSN for D24122LA?
D24122LA is cataloged in the U.S. Government catalog under NSN 5330-00-298-6318. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D24122LA