PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D23596
D23596 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 74.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, inside_length: 20.000 INCHES NOMINAL IN, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-580-2133, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D23596
NSN: 4720-00-580-2133
FSC: 4720
CAGE: 58163 — MEGGITT (NORTH HOLLYWOOD), INC. DBA MEGGITT CONTROL SYSTEMS DIV MEGGITT DEFENSE SYSTEMS, INC. (USA)
SPECIFICATIONS
seat_angle74.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
inside_length20.000 INCHES NOMINAL IN
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.625 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.875 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure140.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure700.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.375 INCHES FIRST END IN
NSN4720-00-580-2133
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: D23596 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE SURFACE CONDITION: SMOOTH
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
SEAT ANGLE: 74.0 DEGREES FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
THREAD SERIES DESIGNATOR: UNF FIRST END
•
OPERATING PRESSURE: 140.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
INSIDE LENGTH: 20.000 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE SURFACE CONDITIONSMOOTH
END CONNECTION DESIGNSTRAIGHT FIRST END
SEAT ANGLE74.0 DEGREES FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
THREAD SERIES DESIGNATORUNF FIRST END
OPERATING PRESSURE140.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
INSIDE LENGTH20.000 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND FIRST END
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF
BURST TEST PRESSURE700.0 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
20NInterchangeable
interchangeable cross-reference
interchangeable
23596Interchangeable
interchangeable cross-reference
interchangeable
9.00-20Interchangeable
interchangeable cross-reference
interchangeable
12435Interchangeable
interchangeable cross-reference
interchangeable
827-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D23596?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D23596?
D23596 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace D23596?
There are 5 known substitutes for D23596: 20N, 23596, 9.00-20 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D23596?
D23596 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-580-2133. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D23596

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026