PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D2334
D2334 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include height: 5.000 INCHES NOMINAL IN, material: STEEL, stem_type: RISING, valve_size: 1.000 INCHES IN, bonnet_type: OUTSIDE SCREW-YOKE, temp_rating: 775.0 FAHRENHEIT NOMINAL DEGF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-049-4267, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D2334
NSN: 5315-01-049-4267
FSC: 5315
CAGE: 17062 — P J VALVES INC (USA)
SPECIFICATIONS
height5.000 INCHES NOMINAL IN
materialSTEEL
stem_typeRISING
valve_size1.000 INCHES IN
bonnet_typeOUTSIDE SCREW-YOKE
temp_rating775.0 FAHRENHEIT NOMINAL DEGF
overall_length13.375 INCHES NOMINAL IN
connection_typeSOCKET, WELD, PIPE
pressure_rating285.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
outside_diameter3.375 INCHES NOMINAL IN
special_featuresHARD FACED STEELITE NO. 6; FOR 2.000 IN. GATE VALVE IN
style_designatorSOLID WEDGE
NSN5315-01-049-4267
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D2334 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: MATERIAL CARBON STEEL AISI 1020
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONMATERIAL CARBON STEEL AISI 1020
END ITEM IDENTIFICATIONP.J HYDRAULICS INC 1.000 IN. GATE VALVE PER DWG D2334 IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
0NI0NInterchangeable
interchangeable cross-reference
interchangeable
E33Interchangeable
interchangeable cross-reference
interchangeable
ONIONInterchangeable
interchangeable cross-reference
interchangeable
D2334Interchangeable
interchangeable cross-reference
interchangeable
B2545Interchangeable
interchangeable cross-reference
interchangeable
D2334-1IN-2CAMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D2334?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D2334?
D2334 is a BEARING,WASHER,THRUST.
What parts can replace D2334?
There are 24 known substitutes for D2334: 0NI0N, E33, ONION and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D2334?
D2334 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-049-4267. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D2334

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026