PartsTable
Technical Data Sheet
Download PDF

D200F2 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

D200F2: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include shaft_style: ROUND, shaft_length: 0.750 INCHES NOMINAL IN, shaft_diameter: 0.250 INCHES NOMINAL IN, mounting_method: STANDARD BUSHING, nonturn_device_radius: 0.500 INCHES NOMINAL IN, reliability_indicator: NOT ESTABLISHED. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-114-9773, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ D200F2
NSN: 5905-00-114-9773
FSC: 5905 — Resistor
CAGE: 44655 — OHMITE HOLDING, L.L.C. DBA OHMITE MANUFACTURING (USA)
SPECIFICATIONS
shaft_styleROUND
shaft_length0.750 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
section_quantity1
nonturn_device_radius0.500 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
screw_thread_diameter0.375 INCHES NOMINAL IN
nonturn_device_locationAT 3 OCLOCK AND AT 6 OCLOCK AND AT 9 OCLOCK AND AT 12 OCLOCK
terminal_type_and_quantity3 TAB, SOLDER LUG
screw_thread_quantity_per_inch32.0
screw_thread_series_designatorUNEF
NSN5905-00-114-9773
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN D200F2 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
NONTURN DEVICE LOCATION: AT 3 OCLOCK AND AT 6 OCLOCK AND AT 9 OCLOCK AND AT 12 OCLOCK
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 200.000 OHMS SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.250 INCHES NOMINAL IN
•
NONTURN DEVICE RADIUS: 0.500 INCHES NOMINAL IN
•
MOUNTING METHOD: STANDARD BUSHING
•
SHAFT STYLE: ROUND
TECHNICAL CHARACTERISTICS
NONTURN DEVICE LOCATIONAT 3 OCLOCK AND AT 6 OCLOCK AND AT 9 OCLOCK AND AT 12 OCLOCK
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION200.000 OHMS SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.500 INCHES NOMINAL IN
MOUNTING METHODSTANDARD BUSHING
SHAFT STYLEROUND
SHAFT LENGTH0.750 INCHES NOMINAL IN
POWER DISSIPATION RATING PER SECTION IN WATTS25.0 FREE AIR SINGLE SECTION
OTHER ITEMS IN FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059
SUBSTITUTES & CROSS-REFERENCES 1
DReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy D200F2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D200F2?
D200F2 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace D200F2?
There is 1 known substitute for D200F2: D. Substitute compatibility should be verified for your specific system.
What is the NSN for D200F2?
D200F2 is cataloged in the U.S. Government catalog under NSN 5905-00-114-9773. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D200F2