PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D2-9792PC435
D2-9792PC435 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,EYE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 1.750 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.750 INCHES MINIMUM IN, overall_length: 4.250 INCHES NOMINAL IN, special_features: CROSS-SECTION OF EYE ROUNDED TO 0.562 IN. DIA IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-207-2733, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D2-9792PC435
NSN: 5306-00-207-2733
FSC: 5306
CAGE: 73057 — USM CORP SUB OF EMHART INDUSTRIES INC FARREL CO DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length1.750 INCHES NOMINAL IN
thread_class3A A
thread_length0.750 INCHES MINIMUM IN
overall_length4.250 INCHES NOMINAL IN
special_featuresCROSS-SECTION OF EYE ROUNDED TO 0.562 IN. DIA IN
style_designatorROUND, CLOSED
thread_directionRIGHT-HAND
eye_stock_diameter0.562 INCHES NOMINAL IN
eye_inside_diameter1.375 INCHES NOMINAL IN
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch11
NSN5306-00-207-2733
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: D2-9792PC435 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.750 INCHES MINIMUM IN
•
DISTANCE FROM CENTER OF EYE TO SHANK END: 3.500 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
EYE INSIDE DIAMETER: 1.375 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 11
•
EYE STOCK DIAMETER: 0.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCROSS-SECTION OF EYE ROUNDED TO 0.562 IN. DIA IN
THREAD LENGTH0.750 INCHES MINIMUM IN
DISTANCE FROM CENTER OF EYE TO SHANK END3.500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
EYE INSIDE DIAMETER1.375 INCHES NOMINAL IN
THREAD QUANTITY PER INCH11
EYE STOCK DIAMETER0.562 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-890,CL BS MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORROUND, CLOSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
3-32BALLGRADE2Interchangeable
interchangeable cross-reference
interchangeable
3-32XBALLGRADE2Interchangeable
interchangeable cross-reference
interchangeable
S7-22Interchangeable
interchangeable cross-reference
interchangeable
2MP1Interchangeable
interchangeable cross-reference
interchangeable
21626Interchangeable
interchangeable cross-reference
interchangeable
2379X3-580Interchangeable
Gauge 2.5
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D2-9792PC435?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D2-9792PC435?
D2-9792PC435 is a BOLT,EYE.
What parts can replace D2-9792PC435?
There are 15 known substitutes for D2-9792PC435: 3-32BALLGRADE2, 3-32XBALLGRADE2, S7-22 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D2-9792PC435?
D2-9792PC435 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-207-2733. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D2-9792PC435

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026