PartsTable
Technical Data Sheet
Download PDF

D2-8116PC70 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

D2-8116PC70: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.562 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 1.125 INCHES MINIMUM IN, fastener_length: 2.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-473-3939, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D2-8116PC70
NSN: 5306-00-473-3939
FSC: 5306 — Bolts
CAGE: 73057 — USM CORP SUB OF EMHART INDUSTRIES INC FARREL CO DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.562 INCHES NOMINAL IN
thread_class3A A
thread_length1.125 INCHES MINIMUM IN
fastener_length2.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats1.062 INCHES NOMINAL IN
nominal_thread_diameter0.750 INCHES IN
minimum_tensile_strength75000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch16
NSN5306-00-473-3939
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: D2-8116PC70 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.562 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.125 INCHES NOMINAL IN
•
THREAD LENGTH: 1.125 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 1.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.562 INCHES NOMINAL IN
FASTENER LENGTH2.125 INCHES NOMINAL IN
THREAD LENGTH1.125 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.750 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS1.062 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH75000 POUNDS PER SQUARE INCH LBS
THREAD CLASS3A A
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-004-7044 5306-00-007-6129 5306-00-008-7899 5306-00-009-4739 5306-00-118-7332 5306-00-151-1777 5306-00-255-4507 5306-01-101-2459
SUBSTITUTES & CROSS-REFERENCES 3
0700202PC24Reference document
Same NSN cross-reference
Reference document — Secondary reference
0800465PC24Reference document
Same NSN cross-reference
Reference document — Secondary reference
D28104PC70Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy D2-8116PC70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D2-8116PC70?
D2-8116PC70 is a BOLT,MACHINE.
What parts can replace D2-8116PC70?
There are 3 known substitutes for D2-8116PC70: 0700202PC24, 0800465PC24, D28104PC70. Substitute compatibility should be verified for your specific system.
What is the NSN for D2-8116PC70?
D2-8116PC70 is cataloged in the U.S. Government catalog under NSN 5306-00-473-3939. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D2-8116PC70