PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D2-48153
D2-48153 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 BALL, bore_shape: STRAIGHT, bore_diameter: 1.3780 INCHES NOMINAL IN, overall_width: 0.5512 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-834-3819, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D2-48153
NSN: 3110-00-834-3819
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 BALL
bore_shapeSTRAIGHT
bore_diameter1.3780 INCHES NOMINAL IN
overall_width0.5512 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0014 INCHES MINIMUM RADIAL AND 0.0021 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
overall_outside_diameter2.4409 INCHES NOMINAL IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.3
NSN3110-00-834-3819
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D2-48153 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.3780 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
•
LUBRICATION MATERIAL: OIL
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-7808 MIL SPEC SINGLE MATERIAL RESPONSE
•
INTERNAL CLEARANCE: 0.0014 INCHES MINIMUM RADIAL AND 0.0021 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.5512 INCHES NOMINAL IN
BORE DIAMETER1.3780 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.3
LUBRICATION MATERIALOIL
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-7808 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL CLEARANCE0.0014 INCHES MINIMUM RADIAL AND 0.0021 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
RETAINER FABRICATION METHODMACHINED
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
907427Interchangeable
interchangeable cross-reference
interchangeable
107KSInterchangeable
interchangeable cross-reference
interchangeable
2560297Interchangeable
interchangeable cross-reference
interchangeable
P9618545-1Interchangeable
interchangeable cross-reference
interchangeable
743458Interchangeable
interchangeable cross-reference
interchangeable
114DS255-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D2-48153?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D2-48153?
D2-48153 is a BEARING,BALL,ANNULAR.
What parts can replace D2-48153?
There are 6 known substitutes for D2-48153: 907427, 107KS, 2560297 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D2-48153?
D2-48153 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-834-3819. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D2-48153

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026