PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D16235
D16235 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CORK AND COTTON OVERALL, hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 5.750 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 3.750 INCHES NOMINAL IN, bolt_circle_diameter: 4.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-246-0300, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D16235
NSN: 5330-00-246-0300
FSC: 5330
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
materialCORK AND COTTON OVERALL
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter5.750 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter3.750 INCHES NOMINAL IN
bolt_hole_quantity3
bolt_circle_diameter4.750 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-246-0300
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D16235 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT CIRCLE DIAMETER: 4.750 INCHES NOMINAL IN
•
MATERIAL: CORK AND COTTON OVERALL
•
BOLT HOLE QUANTITY: 3
•
STYLE DESIGNATOR: CIRCULAR
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE DIAMETER: 5.750 INCHES NOMINAL IN
•
APERTURE DIAMETER: 3.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT CIRCLE DIAMETER4.750 INCHES NOMINAL IN
MATERIALCORK AND COTTON OVERALL
BOLT HOLE QUANTITY3
STYLE DESIGNATORCIRCULAR
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE DIAMETER5.750 INCHES NOMINAL IN
APERTURE DIAMETER3.750 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
A35DA51Interchangeable
interchangeable cross-reference
interchangeable
19532P11Interchangeable
interchangeable cross-reference
interchangeable
342-9102-039Interchangeable
interchangeable cross-reference
interchangeable
16235Interchangeable
interchangeable cross-reference
interchangeable
162356Interchangeable
interchangeable cross-reference
interchangeable
763-1546-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D16235?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D16235?
D16235 is a GASKET.
What parts can replace D16235?
There are 13 known substitutes for D16235: A35DA51, 19532P11, 342-9102-039 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D16235?
D16235 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-246-0300. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D16235

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026