PartsTable
Technical Data Sheet
Download PDF

D16-114 — DISK,VALVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D16-114: DISK,VALVE.

The DISK,VALVE is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.563 INCHES NOMINAL IN, overall_length: 14.750 INCHES NOMINAL IN, special_features: CORNER BEVEL ON TWO CORNERS ONLY,ON EACH END ON ONE SIDE, bolt_hole_quantity: 13. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-073-2552, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D16-114
NSN: 5330-01-073-2552
NIINs: 010732552, 012891466
FSC: 5330 — Packing and Gasket Materials
CAGE: 66544 — FRONTGRADE TECHNOLOGIES INC. (USA)
SPECIFICATIONS
materialRUBBER OVERALL
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.563 INCHES NOMINAL IN
overall_length14.750 INCHES NOMINAL IN
special_featuresCORNER BEVEL ON TWO CORNERS ONLY,ON EACH END ON ONE SIDE
bolt_hole_quantity13
cross-sectional_thickness0.066 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_corner_bevel_length_along_width2.250 INCHES NOMINAL IN
outside_corner_bevel_length_along_length2.250 INCHES NOMINAL IN
NSN5330-01-073-2552
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D16-114 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.066 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH: 2.250 INCHES NOMINAL IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH: 2.250 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 13
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.066 INCHES NOMINAL IN
OVERALL LENGTH14.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.563 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH2.250 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH2.250 INCHES NOMINAL IN
BOLT HOLE QUANTITY13
SPECIAL FEATURESCORNER BEVEL ON TWO CORNERS ONLY,ON EACH END ON ONE SIDE
MATERIALRUBBER OVERALL
HOLE DIAMETER0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy D16-114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D16-114?
D16-114 is a DISK,VALVE.
What is the NSN for D16-114?
D16-114 is cataloged in the U.S. Government catalog under NSN 5330-01-073-2552. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D16-114

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.