PartsTable
Technical Data Sheet
Download PDF

D150619 — ROD,GROOVED,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D150619: ROD,GROOVED,HEADLESS.

The ROD,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, chamfer_angle: 10.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED, groove_length: 3.05 MILLIMETERS MINIMUM AND 3.18 MILLIMETERS MAXIMUM MM, chamfer_length: 17.205 MILLIMETERS NOMINAL LOCATION NOT OTHERWISE SPECIFIED MM, overall_length: 372.6 MILLIMETERS NOMINAL MM, groove_diameter: 41.55 MILLIMETERS MINIMUM AND 41.73 MILLIMETERS MAXIMUM ALL GROOVES MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-507-5643, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D150619
NSN: 5340-01-507-5643
FSC: 5340 — Hardware, Commercial
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
chamfer_angle10.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
groove_length3.05 MILLIMETERS MINIMUM AND 3.18 MILLIMETERS MAXIMUM MM
chamfer_length17.205 MILLIMETERS NOMINAL LOCATION NOT OTHERWISE SPECIFIED MM
overall_length372.6 MILLIMETERS NOMINAL MM
groove_diameter41.55 MILLIMETERS MINIMUM AND 41.73 MILLIMETERS MAXIMUM ALL GROOVES MM
groove_locationBOTH ENDS
groove_quantity2
overall_diameter14.25 MILLIMETERS MINIMUM AND 14.29 MILLIMETERS MAXIMUM MM
surface_treatmentZINC OVERALL
end_item_identification2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR)
NSN5340-01-507-5643
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D150619 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROOVE LOCATION: BOTH ENDS
•
CHAMFER LENGTH: 17.205 MILLIMETERS NOMINAL LOCATION NOT OTHERWISE SPECIFIED MM
•
OVERALL DIAMETER: 14.25 MILLIMETERS MINIMUM AND 14.29 MILLIMETERS MAXIMUM MM
•
GROOVE DIAMETER: 41.55 MILLIMETERS MINIMUM AND 41.73 MILLIMETERS MAXIMUM ALL GROOVES MM
•
GROOVE LENGTH: 3.05 MILLIMETERS MINIMUM AND 3.18 MILLIMETERS MAXIMUM MM
•
GROOVE QUANTITY: 2
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
GROOVE LOCATIONBOTH ENDS
CHAMFER LENGTH17.205 MILLIMETERS NOMINAL LOCATION NOT OTHERWISE SPECIFIED MM
OVERALL DIAMETER14.25 MILLIMETERS MINIMUM AND 14.29 MILLIMETERS MAXIMUM MM
GROOVE DIAMETER41.55 MILLIMETERS MINIMUM AND 41.73 MILLIMETERS MAXIMUM ALL GROOVES MM
OVERALL LENGTH372.6 MILLIMETERS NOMINAL MM
GROOVE LENGTH3.05 MILLIMETERS MINIMUM AND 3.18 MILLIMETERS MAXIMUM MM
GROOVE QUANTITY2
SURFACE TREATMENTZINC OVERALL
CHAMFER ANGLE10.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
END ITEM IDENTIFICATION2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR)
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D150619?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D150619?
D150619 is a ROD,GROOVED,HEADLESS.
What is the NSN for D150619?
D150619 is cataloged in the U.S. Government catalog under NSN 5340-01-507-5643. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D150619

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.