D15-743J-342A — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

D15-743J-342A: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 9-1/4, inside_diameter: 1.375 INCHES NOMINAL IN, style_designator: CYLINDRICAL, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-291-7596, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

D15-743J-342A

NSN: 5360-00-291-7596
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 90099 — NORTHROP GRUMMAN SYSTEMS CORPORATION DIV MARINE SYSTEMS (USA)

SPECIFICATIONS

material	STEEL OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity	9-1/4
inside_diameter	1.375 INCHES NOMINAL IN
style_designator	CYLINDRICAL
surface_treatment	CADMIUM OVERALL
spring_free_length	4.000 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND
spring_deflection_rate	282.000 POUNDS PER INCH NOMINAL LBS
spring_free_outside_diameter	1.937 INCHES NOMINAL IN
material_document_and_classification	JAN-S-1160,TYPE A-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5360-00-291-7596

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 1.937 INCHES NOMINAL IN

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: JAN-S-1160,TYPE A-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 4.000 INCHES NOMINAL IN

•

SPRING DEFLECTION RATE: 282.000 POUNDS PER INCH NOMINAL LBS

•

INSIDE DIAMETER: 1.375 INCHES NOMINAL IN

•

COIL QUANTITY: 9-1/4

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	1.937 INCHES NOMINAL IN
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	JAN-S-1160,TYPE A-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	4.000 INCHES NOMINAL IN
SPRING DEFLECTION RATE	282.000 POUNDS PER INCH NOMINAL LBS
INSIDE DIAMETER	1.375 INCHES NOMINAL IN
COIL QUANTITY	9-1/4
SURFACE TREATMENT	CADMIUM OVERALL
COIL HELIX DIRECTION	RIGHT-HAND

SUBSTITUTES & CROSS-REFERENCES 4

708QReference document

Same NSN cross-reference

Reference document — Secondary reference

4322Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

D15-743JPC342AReference document

Same NSN cross-reference

Reference document — Secondary reference

708Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy D15-743J-342A?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is D15-743J-342A?

D15-743J-342A is a SPRING,HELICAL,COMPRESSION.

What parts can replace D15-743J-342A?

There are 4 known substitutes for D15-743J-342A: 708Q, 4322, D15-743JPC342A and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for D15-743J-342A?

D15-743J-342A is cataloged in the U.S. Government catalog under NSN 5360-00-291-7596. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

D15-743J-342A — SPRING,HELICAL,COMPRESSION

Request a Quote — D15-743J-342A