PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D15-716WPC723
D15-716WPC723 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.676 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN, pin_overall_diameter: 0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.016 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-0743, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D15-716WPC723
NSN: 5315-00-011-0743
FSC: 5315
CAGE: 90099 — NORTHROP GRUMMAN SYSTEMS CORPORATION DIV MARINE SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length0.676 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
pin_overall_diameter0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.016 INCHES NOMINAL IN
material_document_and_classificationQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-011-0743
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D15-716WPC723 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL DIAMETER: 0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL LENGTH: 0.676 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH0.676 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
110743Interchangeable
interchangeable cross-reference
interchangeable
W10074Interchangeable
interchangeable cross-reference
interchangeable
D161950Interchangeable
interchangeable cross-reference
interchangeable
UA34693Interchangeable
interchangeable cross-reference
interchangeable
53AInterchangeable
interchangeable cross-reference
interchangeable
5-4-583ITEM5-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D15-716WPC723?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D15-716WPC723?
D15-716WPC723 is a PIN,STRAIGHT,HEADLESS.
What parts can replace D15-716WPC723?
There are 21 known substitutes for D15-716WPC723: 110743, W10074, D161950 and 18 more. Substitute compatibility should be verified for your specific system.
Is D15-716WPC723 still available?
D15-716WPC723 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D15-716WPC723

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026