PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D15-600BPC355
D15-600BPC355 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include first_end_style: CHAMFERED, pin_overall_length: 0.738 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN, pin_overall_diameter: 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.031 INCHES NOMINAL IN, material_document_and_classification: ASTM A576 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3767, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D15-600BPC355
NSN: 5315-00-010-3767
FSC: 5315
CAGE: 90099 — NORTHROP GRUMMAN SYSTEMS CORPORATION DIV MARINE SYSTEMS (USA)
SPECIFICATIONS
first_end_styleCHAMFERED
pin_overall_length0.738 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
pin_overall_diameter0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationASTM A576 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-010-3767
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D15-600BPC355 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL LENGTH: 0.738 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A576 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1027 OR STEEL COMP 1030 OR STEEL COMP 1524 OVERALL
•
PIN OVERALL DIAMETER: 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL LENGTH0.738 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A576 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1027 OR STEEL COMP 1030 OR STEEL COMP 1524 OVERALL
PIN OVERALL DIAMETER0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
103767Interchangeable
interchangeable cross-reference
interchangeable
8027521Interchangeable
interchangeable cross-reference
interchangeable
088-1-422Interchangeable
interchangeable cross-reference
interchangeable
TRCB221CInterchangeable
interchangeable cross-reference
interchangeable
RC20-220HMSP0RM5PCTInterchangeable
interchangeable cross-reference
interchangeable
4171306-604Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D15-600BPC355?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D15-600BPC355?
D15-600BPC355 is a PIN,STRAIGHT,HEADLESS.
What parts can replace D15-600BPC355?
There are 23 known substitutes for D15-600BPC355: 103767, 8027521, 088-1-422 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D15-600BPC355?
D15-600BPC355 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3767. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D15-600BPC355

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026