PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D14 NON-ASBESTOS
D14 NON-ASBESTOS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 8.750 INCHES NOMINAL IN, special_features: MATERIAL NON-ASBESTOS, style_designator: CIRCULAR, aperture_diameter: 7.125 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-378-2108, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D14 NON-ASBESTOS
NSN: 5330-01-378-2108
FSC: 5330
CAGE: 79128 — ROBERT H WAGER CO INC (USA)
SPECIFICATIONS
outside_diameter8.750 INCHES NOMINAL IN
special_featuresMATERIAL NON-ASBESTOS
style_designatorCIRCULAR
aperture_diameter7.125 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-378-2108
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D14 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 8.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 7.125 INCHES NOMINAL IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
SPECIAL FEATURESMATERIAL NON-ASBESTOS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
OUTSIDE DIAMETER8.750 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER7.125 INCHES NOMINAL IN
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
5651Interchangeable
interchangeable cross-reference
interchangeable
D14Interchangeable
interchangeable cross-reference
interchangeable
MILD3146Interchangeable
interchangeable cross-reference
interchangeable
86194Interchangeable
interchangeable cross-reference
interchangeable
6296785Interchangeable
interchangeable cross-reference
interchangeable
22HS794Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D14 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D14 NON-ASBESTOS?
D14 NON-ASBESTOS is a GASKET.
What parts can replace D14 NON-ASBESTOS?
There are 18 known substitutes for D14 NON-ASBESTOS: 5651, D14, MILD3146 and 15 more. Substitute compatibility should be verified for your specific system.
Is D14 NON-ASBESTOS still available?
D14 NON-ASBESTOS is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D14 NON-ASBESTOS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026