PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D11853
D11853 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.240 INCHES NOMINAL IN, first_leg_length: 0.484 INCHES NOMINAL IN, second_leg_style: SQUARE AND TAPERED, second_leg_width: 0.240 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-993-8137, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D11853
NSN: 5340-00-993-8137
FSC: 5340
CAGE: 71468 — ITT CANNON LLC (USA)
SPECIFICATIONS
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width0.240 INCHES NOMINAL IN
first_leg_length0.484 INCHES NOMINAL IN
second_leg_styleSQUARE AND TAPERED
second_leg_width0.240 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length0.489 INCHES NOMINAL IN
mounting_hole_typeCOUNTERSUNK
first_leg_thickness0.067 INCHES NOMINAL IN
second_leg_end_width0.130 INCHES NOMINAL IN
second_leg_thickness0.067 INCHES NOMINAL IN
NSN5340-00-993-8137
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D11853 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG LENGTH: 0.489 INCHES NOMINAL IN
•
SECOND LEG THICKNESS: 0.067 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 0.240 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.232 INCHES NOMINAL IN
•
FIRST LEG LENGTH: 0.484 INCHES NOMINAL IN
•
FIRST LEG STYLE: SQUARE
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SECOND LEG LENGTH0.489 INCHES NOMINAL IN
SECOND LEG THICKNESS0.067 INCHES NOMINAL IN
SECOND LEG WIDTH0.240 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.232 INCHES NOMINAL IN
FIRST LEG LENGTH0.484 INCHES NOMINAL IN
FIRST LEG STYLESQUARE
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.120 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
FIRST LEG WIDTH0.240 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
20362Upgraded Successor
successor cross-reference
successor
452-1415Interchangeable
interchangeable cross-reference
interchangeable
7R15026-5Interchangeable
interchangeable cross-reference
interchangeable
A-A-50179Interchangeable
interchangeable cross-reference
interchangeable
AP200-1/3-6Interchangeable
interchangeable cross-reference
interchangeable
TRANSFORMER BLACKInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D11853?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D11853?
D11853 is a BRACKET,ANGLE.
What parts can replace D11853?
There are 7 known substitutes for D11853: 20362, 452-1415, 7R15026-5 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D11853?
D11853 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-993-8137. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D11853

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026