PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D118-27
D118-27 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, thickness: 0.065 INCHES NOMINAL IN, hole_diameter: 0.312 INCHES NOMINAL IN, overall_diameter: 0.750 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-3628, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D118-27
NSN: 5310-00-058-3628
FSC: 5310
CAGE: 91340 — MET-PRO CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
thickness0.065 INCHES NOMINAL IN
hole_diameter0.312 INCHES NOMINAL IN
overall_diameter0.750 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-S-763,CLASS 7,TYPE B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-058-3628
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D118-27 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.750 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
THICKNESS: 0.065 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
HOLE DIAMETER: 0.312 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,CLASS 7,TYPE B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.750 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.065 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.312 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,CLASS 7,TYPE B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 303 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
11827Interchangeable
interchangeable cross-reference
interchangeable
242-12Interchangeable
interchangeable cross-reference
interchangeable
583628Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D118-27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D118-27?
D118-27 is a WASHER,FLAT.
What parts can replace D118-27?
There are 3 known substitutes for D118-27: 11827, 242-12, 583628. Substitute compatibility should be verified for your specific system.
What is the NSN for D118-27?
D118-27 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-3628. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D118-27

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026