PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D117-86
D117-86 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.031 INCHES NOMINAL IN, hole_diameter: 0.266 INCHES NOMINAL IN, overall_diameter: 0.625 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-560-5575, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D117-86
NSN: 5310-00-560-5575
FSC: 5310
CAGE: 74465 — HOOF PRODUCTS CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.031 INCHES NOMINAL IN
hole_diameter0.266 INCHES NOMINAL IN
overall_diameter0.625 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-560-5575
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D117-86 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
THICKNESS: 0.031 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.266 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.625 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.031 INCHES NOMINAL IN
HOLE DIAMETER0.266 INCHES NOMINAL IN
OVERALL DIAMETER0.625 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
17451Interchangeable
interchangeable cross-reference
interchangeable
998392Interchangeable
interchangeable cross-reference
interchangeable
J3208311Interchangeable
interchangeable cross-reference
interchangeable
MC56193Interchangeable
interchangeable cross-reference
interchangeable
F17451Interchangeable
interchangeable cross-reference
interchangeable
006466V043Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D117-86?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D117-86?
D117-86 is a WASHER,FLAT.
What parts can replace D117-86?
There are 16 known substitutes for D117-86: 17451, 998392, J3208311 and 13 more. Substitute compatibility should be verified for your specific system.
Is D117-86 still available?
D117-86 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D117-86

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026