PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D11182
D11182 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,JOURNAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.4980 INCHES NOMINAL IN, overall_width: 1.1875 INCHES NOMINAL IN, special_features: OIL HOLE IN OUTER RING, style_designator: SOLID INNER AND OUTER RACES, overall_outside_diameter: 3.1496 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-190-9317, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D11182
NSN: 3110-00-190-9317
FSC: 3110
CAGE: 51600 — REGAL BELOIT AMERICA, INC. DBA ROLLWAY BEARING (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.4980 INCHES NOMINAL IN
overall_width1.1875 INCHES NOMINAL IN
special_featuresOIL HOLE IN OUTER RING
style_designatorSOLID INNER AND OUTER RACES
overall_outside_diameter3.1496 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCES FOR JOURNAL BEARINGS
NSN3110-00-190-9317
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D11182 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 3.1496 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SOLID INNER AND OUTER RACES
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 1.4980 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCES FOR JOURNAL BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER3.1496 INCHES NOMINAL IN
SPECIAL FEATURESOIL HOLE IN OUTER RING
OVERALL WIDTH1.1875 INCHES NOMINAL IN
STYLE DESIGNATORSOLID INNER AND OUTER RACES
MATERIALSTEEL OVERALL
BORE DIAMETER1.4980 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCES FOR JOURNAL BEARINGS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
MILG2697TYPEAInterchangeable
interchangeable cross-reference
interchangeable
347Interchangeable
interchangeable cross-reference
interchangeable
1221121Interchangeable
interchangeable cross-reference
interchangeable
110999AInterchangeable
interchangeable cross-reference
interchangeable
107666Interchangeable
interchangeable cross-reference
interchangeable
347BPLUGInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D11182?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D11182?
D11182 is a BEARING,ROLLER,JOURNAL.
What parts can replace D11182?
There are 17 known substitutes for D11182: MILG2697TYPEA, 347, 1221121 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D11182?
D11182 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-190-9317. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D11182

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026