PartsTable
Technical Data Sheet
Download PDF

D1084 — SCREW,MACHINE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D1084: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, construction: SOLID, style_designator: CIRCULAR, aperture_diameter: 22.450 INCHES NOMINAL IN, cross-sectional_height: 0.250 INCHES NOMINAL IN, cross_section_outside_diameter: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-062-7420, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D1084
NSN: 5330-00-062-7420
NIINs: 000627420, 013226521
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
constructionSOLID
style_designatorCIRCULAR
aperture_diameter22.450 INCHES NOMINAL IN
cross-sectional_height0.250 INCHES NOMINAL IN
cross-sectional_shape_styleD
cross_section_outside_diameter0.500 INCHES NOMINAL IN
smooth_finish_surface_locationBOTTOM AND TOP
material_document_and_classificationMIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-062-7420
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D1084 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: D
•
APERTURE DIAMETER: 22.450 INCHES NOMINAL IN
•
CROSS SECTION OUTSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
SMOOTH FINISH SURFACE LOCATION: BOTTOM AND TOP
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLED
APERTURE DIAMETER22.450 INCHES NOMINAL IN
CROSS SECTION OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
SMOOTH FINISH SURFACE LOCATIONBOTTOM AND TOP
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 3
MS27683-92Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
826384Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS63054-41Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D1084?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D1084?
D1084 is a SCREW,MACHINE.
What parts can replace D1084?
There are 3 known substitutes for D1084: MS27683-92, 826384, MS63054-41. Substitute compatibility should be verified for your specific system.
What is the NSN for D1084?
D1084 is cataloged in the U.S. Government catalog under NSN 5330-00-062-7420. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D1084