PartsTable
Technical Data Sheet
Download PDF

D1031-00-A — RETAINER,SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D1031-00-A: RETAINER,SEAL.

The RETAINER,SEAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, special_features: 1MM X 26MM X 910MM STRIP WITH 5MM HOLES DRILLED TO SUIT 3/16 INCH RIVETS MM, material_document_and_classification: ASTM A304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL, part_name_assigned_by_controlling_agency: GASKET CARRIER-SHORT. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-503-4885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D1031-00-A
NSN: 5330-01-503-4885
FSC: 5330 — Packing and Gasket Materials
CAGE: 29381 — GICHNER SYSTEMS GROUP, INC. DIV C5ISR DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
special_features1MM X 26MM X 910MM STRIP WITH 5MM HOLES DRILLED TO SUIT 3/16 INCH RIVETS MM
material_document_and_classificationASTM A304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyGASKET CARRIER-SHORT
NSN5330-01-503-4885
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D1031-00-A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 304 OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SPECIAL FEATURES1MM X 26MM X 910MM STRIP WITH 5MM HOLES DRILLED TO SUIT 3/16 INCH RIVETS MM
PART NAME ASSIGNED BY CONTROLLING AGENCYGASKET CARRIER-SHORT
MATERIALSTEEL COMP 304 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
1031-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
1031Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy D1031-00-A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D1031-00-A?
D1031-00-A is a RETAINER,SEAL.
What parts can replace D1031-00-A?
There are 2 known substitutes for D1031-00-A: 1031-00, 1031. Substitute compatibility should be verified for your specific system.
What is the NSN for D1031-00-A?
D1031-00-A is cataloged in the U.S. Government catalog under NSN 5330-01-503-4885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D1031-00-A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.