PartsTable
Technical Data Sheet
Download PDF

D10137 — ELBOW,TUBE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

D10137: ELBOW,TUBE.

The ELBOW,TUBE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING ELBOW, flow_angle: 45.0 DEGREES, leg_length: 2.173 INCHES MINIMUM AND 2.203 INCHES MAXIMUM SECOND END IN, seat_angle: 12.0 DEGREES FIRST END, thread_class: 3B FIRST END, connection_type: UNTHREADED INTERNAL TUBE SECOND END. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-536-2264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D10137
NSN: 4730-00-536-2264
NIINs: 005362264, 005362276
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 14798 — DESIGNED METAL CONNECTIONS INC DBA PERMASWAGE USA DIV PERMASWAGE, A PCC COMPANY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING ELBOW
flow_angle45.0 DEGREES
leg_length2.173 INCHES MINIMUM AND 2.203 INCHES MAXIMUM SECOND END IN
seat_angle12.0 DEGREES FIRST END
thread_class3B FIRST END
connection_typeUNTHREADED INTERNAL TUBE SECOND END
connection_stylePLAIN (TUBE) SECOND END
special_featuresTHE INTERNAL SURFACE OF THE PERMASWAGE END WILL BE POLYTETRAFLUOROETHYLENE COATE PER DEUTSCH CO.SPEC NO.DMCPS 1009 TO 0.410 IN.MIN 0.435 IN.MAX INTO THE FITTING BORE IN
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.750 INCHES FIRST END IN
end_item_identification05A HELICOPTER, CHINOOK, CH-47 A
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
NSN4730-00-536-2264
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: D10137 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 5
D10137-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
D10737&6Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D10137-06Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
4730PL1950600Reference document
Same NSN cross-reference
Reference document — Informative reference only
BACE21BVReference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy D10137?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D10137?
D10137 is a ELBOW,TUBE.
What parts can replace D10137?
There are 5 known substitutes for D10137: D10137-6, D10737&6, D10137-06 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D10137?
D10137 is cataloged in the U.S. Government catalog under NSN 4730-00-536-2264. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D10137