PartsTable
Technical Data Sheet
Download PDF

D10-64 — TARGET,RADAR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

D10-64: TARGET,RADAR.

The TARGET,RADAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, usage_design: RADAR TARGET ASSY, hole_diameter: 1.276 INCHES MINIMUM AND 1.286 INCHES MAXIMUM IN, overall_width: 12.000 INCHES NOMINAL IN, overall_height: 12.500 INCHES NOMINAL IN, overall_length: 16.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-312-4805, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ D10-64
NSN: 5310-00-312-4805
NIINs: 003124805, 012544720, 012708420, 013219665
FSC: 5310 — Nuts and Washers
CAGE: 44541 — MAGNETICS INTL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
usage_designRADAR TARGET ASSY
hole_diameter1.276 INCHES MINIMUM AND 1.286 INCHES MAXIMUM IN
overall_width12.000 INCHES NOMINAL IN
overall_height12.500 INCHES NOMINAL IN
overall_length16.000 INCHES NOMINAL IN
outside_diameter1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN
overall_diameter12.000 INCHES NOMINAL IN
material_thickness0.015 INCHES NOMINAL IN
supplementary_featuresINCLUDES 1 MODEL 012A SPHERE,1 8 IN. SCH. 40 PVC PIPE P/N 819-100007 COLLAR,1 PLASTIC PVC J25 P/N 819-100006 SKID A
end_item_identification6350-01-173-9680,MICROWAVE SENSOR,P/N 10006-001-34,P/O RACON MICROWAVE SECURITY SYSTEM
reflecting_element_overall_width12.000 INCHES NOMINAL IN
NSN5310-00-312-4805
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D10-64 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.015 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 1.276 INCHES MINIMUM AND 1.286 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.094 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN
MATERIAL THICKNESS0.015 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER1.276 INCHES MINIMUM AND 1.286 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 10
ND90333PC33Reference document
Same NSN cross-reference
Reference document — Secondary reference
ND90353PC33Reference document
Same NSN cross-reference
Reference document — Secondary reference
ND90369PC32Reference document
Same NSN cross-reference
Reference document — Secondary reference
ND90301PC28Reference document
Same NSN cross-reference
Reference document — Secondary reference
ND90280PC31Reference document
Same NSN cross-reference
Reference document — Secondary reference
ND90355PC33Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D10-64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D10-64?
D10-64 is a TARGET,RADAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace D10-64?
There are 10 known substitutes for D10-64: ND90333PC33, ND90353PC33, ND90369PC32 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D10-64?
D10-64 is cataloged in the U.S. Government catalog under NSN 5310-00-312-4805. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D10-64

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.