PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D1-32894
D1-32894 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 20.00 MILLIMETERS NOMINAL MM, overall_width: 9.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-275-0128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D1-32894
NSN: 3110-00-275-0128
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter20.00 MILLIMETERS NOMINAL MM
overall_width9.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter37.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.3
NSN3110-00-275-0128
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D1-32894 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
LOAD DIRECTION: RADIAL
•
MATERIAL: STEEL OUTER RING
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 37.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODMACHINED
LOAD DIRECTIONRADIAL
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL BALL
MATERIALCOPPER ALLOY RETAINER
OVERALL OUTSIDE DIAMETER37.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
A-A-59582Interchangeable
interchangeable cross-reference
interchangeable
A-A-59582-504JEBHInterchangeable
interchangeable cross-reference
interchangeable
177709-63Interchangeable
interchangeable cross-reference
interchangeable
AJ9800-23-2Interchangeable
interchangeable cross-reference
interchangeable
HDT001Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D1-32894?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D1-32894?
D1-32894 is a BEARING,BALL,ANNULAR.
What parts can replace D1-32894?
There are 32 known substitutes for D1-32894: A-A-59582, A-A-59582-504JEBH, 177709-63 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D1-32894?
D1-32894 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-275-0128. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D1-32894

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026