PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D1-3
D1-3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The UNIVERSAL JOINT,NONVEHICULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: PANEL MOUNT, bore_shape: STRAIGHT BOTH ENDS, bore_length: 0.2810 INCHES NOMINAL BOTH ENDS IN, body_material: STEEL CORROSION RESISTING, bore_diameter: 0.2500 INCHES NOMINAL BOTH ENDS IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8522, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D1-3
NSN: 3110-00-100-8522
FSC: 3110
CAGE: 03489 — ANDREWS BEARING CORP DIV OF MPB CORP SUB OF WHEELABRATOR-FRYE INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_stylePANEL MOUNT
bore_shapeSTRAIGHT BOTH ENDS
bore_length0.2810 INCHES NOMINAL BOTH ENDS IN
body_materialSTEEL CORROSION RESISTING
bore_diameter0.2500 INCHES NOMINAL BOTH ENDS IN
outside_shapeROUND
alignment_typeRIGID
overall_height0.6250 INCHES NOMINAL IN
overall_length0.562 INCHES NOMINAL IN
surface_finishGROUND
mounting_methodPANEL
NSN3110-00-100-8522
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D1-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 2.3437 INCHES NOMINAL IN
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
ALIGNMENT TYPE: RIGID
•
BORE SMALLEST DIAMETER: 1.2500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESRETAINERLESS TYPE
OVERALL HEIGHT0.6250 INCHES NOMINAL IN
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER2.3437 INCHES NOMINAL IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
ALIGNMENT TYPERIGID
BORE SMALLEST DIAMETER1.2500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATORGROOVED RACE SURFACE, BANDED OD
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
116407Interchangeable
interchangeable cross-reference
interchangeable
BT13Interchangeable
interchangeable cross-reference
interchangeable
UJ-20Interchangeable
interchangeable cross-reference
interchangeable
D-13Interchangeable
interchangeable cross-reference
interchangeable
755-507Interchangeable
interchangeable cross-reference
interchangeable
XP-524-S3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D1-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D1-3?
D1-3 is a UNIVERSAL JOINT,NONVEHICULAR.
What parts can replace D1-3?
There are 28 known substitutes for D1-3: 116407, BT13, UJ-20 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D1-3?
D1-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8522. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D1-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026