PartsTable
Technical Data Sheet
Download PDF

D1-12406 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

D1-12406: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, alignment_type: RIGID, overall_height: 0.6250 INCHES NOMINAL IN, surface_finish: GROUND, special_features: 0.9063 LARGE BORE, style_designator: GROOVED RACE SURFACE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-1713, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D1-12406
NSN: 3110-00-156-1713
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
alignment_typeRIGID
overall_height0.6250 INCHES NOMINAL IN
surface_finishGROUND
special_features0.9063 LARGE BORE
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter0.8750 INCHES NOMINAL IN
overall_outside_diameter1.6563 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-156-1713
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D1-12406 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 1.6563 INCHES NOMINAL IN
•
BORE SMALLEST DIAMETER: 0.8750 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.6250 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORGROOVED RACE SURFACE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER1.6563 INCHES NOMINAL IN
BORE SMALLEST DIAMETER0.8750 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURES0.9063 LARGE BORE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
SUBSTITUTES & CROSS-REFERENCES 7
4307Reference document
Same NSN cross-reference
Reference document — Secondary reference
W7-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
149718Reference document
Same NSN cross-reference
Reference document — Secondary reference
4BReference document
Same NSN cross-reference
Reference document — Secondary reference
31012AReference document
Same NSN cross-reference
Reference document — Secondary reference
MS17161-19Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D1-12406?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D1-12406?
D1-12406 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace D1-12406?
There are 7 known substitutes for D1-12406: 4307, W7-8, 149718 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D1-12406?
D1-12406 is cataloged in the U.S. Government catalog under NSN 3110-00-156-1713. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D1-12406