PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D0D-P-24583 CLA SS I 7/8IN SQ

D0D-P-24583 CLA SS I 7/8IN SQ — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include material: GRAPHITE, fabrication_method: BRAIDED, cross-sectional_width: 0.875 INCHES NOMINAL IN, cross-sectional_height: 0.875 INCHES NOMINAL IN, cross-sectional_shape_style: SQUARE, nondefinitive_spec/std_data: 1 CLASS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5330-01-104-6151, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D0D-P-24583 CLA SS I 7/8IN SQ
NSN: 5330-01-104-6151
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialGRAPHITE
fabrication_methodBRAIDED
cross-sectional_width0.875 INCHES NOMINAL IN
cross-sectional_height0.875 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
nondefinitive_spec/std_data1 CLASS
material_document_and_classificationDOD-P-24583 CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5330-01-104-6151
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D0D-P-24583 CLA SS I 7/8IN SQ MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 0.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.875 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 CLASS
•
MATERIAL: GRAPHITE
•
MATERIAL DOCUMENT AND CLASSIFICATION: DOD-P-24583 CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE
•
FABRICATION METHOD: BRAIDED
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL WIDTH0.875 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.875 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 CLASS
MATERIALGRAPHITE
MATERIAL DOCUMENT AND CLASSIFICATIONDOD-P-24583 CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE
FABRICATION METHODBRAIDED
CROSS-SECTIONAL SHAPE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
D0D-P-24583 CLA SS 1 5/16 SQInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
DOD-P-24583InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-P-24583.312InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
D0D-P-24583 CLA SS I 3/8IN SQInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
D0D-P-24583 CLA SS I 7/16IN SQInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
D0D-P-24583 CLA SS I 9/16IN SQInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D0D-P-24583 CLA SS I 7/8IN SQ?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D0D-P-24583 CLA SS I 7/8IN SQ?
D0D-P-24583 CLA SS I 7/8IN SQ is a PACKING MATERIAL.
What parts can replace D0D-P-24583 CLA SS I 7/8IN SQ?
There are 13 known substitutes for D0D-P-24583 CLA SS I 7/8IN SQ: D0D-P-24583 CLA SS 1 5/16 SQ, DOD-P-24583, MIL-P-24583.312 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D0D-P-24583 CLA SS I 7/8IN SQ?
D0D-P-24583 CLA SS I 7/8IN SQ is cataloged in the Federal Logistics Information System under NSN 5330-01-104-6151. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D0D-P-24583 CLA SS I 7/8IN SQ

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026