PartsTable
Technical Data Sheet
Download PDF

D084-1022CP — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D084-1022CP: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include end_item_identification: VALVE, ANGLE RELIEF, 1/2 INCH X 3/4 INCH IPS. IN, criticality_code_justification: ZZZY, part_name_assigned_by_controlling_agency: GASKET, CAP, reference_number_differentiating_characteristics: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-564-2293, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D084-1022CP
NSN: 5330-01-564-2293
FSC: 5330 — Packing and Gasket Materials
CAGE: 6UY05 — COLD LLC (USA)
SPECIFICATIONS
end_item_identificationVALVE, ANGLE RELIEF, 1/2 INCH X 3/4 INCH IPS. IN
criticality_code_justificationZZZY
part_name_assigned_by_controlling_agencyGASKET, CAP
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-01-564-2293
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D084-1022CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TECHNICAL CHARACTERISTICS
CRITICALITY CODE JUSTIFICATIONZZZY
PART NAME ASSIGNED BY CONTROLLING AGENCYGASKET, CAP
END ITEM IDENTIFICATIONVALVE, ANGLE RELIEF, 1/2 INCH X 3/4 INCH IPS. IN
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SUBSTITUTES & CROSS-REFERENCES 2
D084-1000 ITEM NO. 22Reference document
Same NSN cross-reference
Reference document — Secondary reference
D084-1000Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D084-1022CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D084-1022CP?
D084-1022CP is a GASKET.
What parts can replace D084-1022CP?
There are 2 known substitutes for D084-1022CP: D084-1000 ITEM NO. 22, D084-1000. Substitute compatibility should be verified for your specific system.
What is the NSN for D084-1022CP?
D084-1022CP is cataloged in the U.S. Government catalog under NSN 5330-01-564-2293. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D084-1022CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.