PartsTable
Technical Data Sheet
Download PDF

D07951-1032-3B — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D07951-1032-3B: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 0.520 INCHES MAXIMUM IN, overall_height: 0.354 INCHES MAXIMUM IN, overall_length: 0.531 INCHES MAXIMUM IN, style_designator: CLIP, surface_treatment: ZINC. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-804-3639, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D07951-1032-3B
NSN: 5340-00-804-3639
FSC: 5340 — Hardware, Commercial
CAGE: 3AXX2 — FLINTHILLS TRADING COMPANY, LLC DBA GL HUYETT (USA)
SPECIFICATIONS
materialSTEEL
overall_width0.520 INCHES MAXIMUM IN
overall_height0.354 INCHES MAXIMUM IN
overall_length0.531 INCHES MAXIMUM IN
style_designatorCLIP
surface_treatmentZINC
material_thickness0.020 INCHES NOMINAL IN
NSN5340-00-804-3639
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D07951-1032-3B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CLIP
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.354 INCHES MAXIMUM IN
STYLE DESIGNATORCLIP
OVERALL LENGTH0.531 INCHES MAXIMUM IN
OVERALL WIDTH0.520 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SURFACE TREATMENTZINC
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
C7951-1032-3BReference document
Same NSN cross-reference
Reference document — Design control — primary reference
10930481Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D07951-1032-3B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D07951-1032-3B?
D07951-1032-3B is a RETAINER,NUT AND BOLT.
What parts can replace D07951-1032-3B?
There are 2 known substitutes for D07951-1032-3B: C7951-1032-3B, 10930481. Substitute compatibility should be verified for your specific system.
What is the NSN for D07951-1032-3B?
D07951-1032-3B is cataloged in the U.S. Government catalog under NSN 5340-00-804-3639. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D07951-1032-3B

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.