PartsTable
Technical Data Sheet
Download PDF

D0596561 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D0596561: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL RETAINER, temp_rating: -40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 1.315 INCHES MINIMUM AND 1.319 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-808-2335, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D0596561
NSN: 5330-00-808-2335
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialPLASTIC TETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL RETAINER
temp_rating-40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter1.315 INCHES MINIMUM AND 1.319 INCHES MAXIMUM IN
center_hole_diameter1.144 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-808-2335
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D0596561 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CUT TYPE: DIAGONAL OVERALL
•
PERIPHERAL DIAMETER: 1.315 INCHES MINIMUM AND 1.319 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.144 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CUT TYPEDIAGONAL OVERALL
PERIPHERAL DIAMETER1.315 INCHES MINIMUM AND 1.319 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.144 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL RETAINER
SUBSTITUTES & CROSS-REFERENCES 7
MS28774-122Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS8791Reference document
Same NSN cross-reference
Reference document — Secondary reference
10119530Reference document
Same NSN cross-reference
Reference document — Informative reference only
1090-41565 ITEM 19Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
701232-122Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
180122N0300Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy D0596561?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D0596561?
D0596561 is a RETAINER,PACKING.
What parts can replace D0596561?
There are 7 known substitutes for D0596561: MS28774-122, AS8791, 10119530 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D0596561?
D0596561 is cataloged in the U.S. Government catalog under NSN 5330-00-808-2335. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D0596561

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.