PartsTable / O-RING / D0558184
D0558184
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.111 INCHES MINIMUM AND 2.163 INCHES MAXIMUM IN, center_hole_diameter: 1.849 INCHES MINIMUM AND 1.869 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-434-1494, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
D0558184
NSN: 5331-00-434-1494 FSC: 5331 — O-RINGCAGE: A0461 — CALZONI SRL (ITA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A NOMINAL outside_diameter 2.111 INCHES MINIMUM AND 2.163 INCHES MAXIMUM IN center_hole_diameter 1.849 INCHES MINIMUM AND 1.869 INCHES MAXIMUM IN cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-434-1494
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: D0558184
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 2.111 INCHES MINIMUM AND 2.163 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
• CENTER HOLE DIAMETER: 1.849 INCHES MINIMUM AND 1.869 INCHES MAXIMUM IN
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 2.111 INCHES MINIMUM AND 2.163 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TEMP RATING -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF CENTER HOLE DIAMETER 1.849 INCHES MINIMUM AND 1.869 INCHES MAXIMUM IN HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
005225 Interchangeable interchangeable cross-reference
interchangeable
2116 Interchangeable interchangeable cross-reference
interchangeable
02116 Interchangeable interchangeable cross-reference
interchangeable
90612 Interchangeable interchangeable cross-reference
interchangeable
930037/3 Interchangeable interchangeable cross-reference
interchangeable
PTL8-BLACK Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy D0558184?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D0558184?
D0558184 is a O-RING.
What parts can replace D0558184?
There are 14 known substitutes for D0558184: 005225, 2116, 02116 and 11 more. Substitute compatibility should be verified for your specific system.
Is D0558184 still available?
D0558184 is currently cancelled.
Request a Quote — D0558184