PartsTable
Technical Data Sheet
Download PDF

D014W431 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

D014W431: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.14 INCHES MINIMUM AND 0.16 INCHES MAXIMUM IN, diameter: 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT CHAMFER, special_features: STYLE - CLEVIS PIN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-731-0232, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D014W431
NSN: 5315-01-731-0232
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
height0.14 INCHES MINIMUM AND 0.16 INCHES MAXIMUM IN
diameter0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT CHAMFER
special_featuresSTYLE - CLEVIS PIN
style_designatorSTRAIGHT
pin_head_diameter0.61 INCHES MINIMUM AND 0.63 INCHES MAXIMUM IN
under_head_length1.62 INCHES MINIMUM AND 1.64 INCHES MAXIMUM IN
end_item_identification2355016545325
part_name_assigned_by_controlling_agencyPIN, CLEVIS
NSN5315-01-731-0232
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D014W431 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDER HEAD LENGTH: 1.62 INCHES MINIMUM AND 1.64 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.61 INCHES MINIMUM AND 0.63 INCHES MAXIMUM IN
•
DIAMETER: 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT CHAMFER
•
HEIGHT: 0.14 INCHES MINIMUM AND 0.16 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDER HEAD LENGTH1.62 INCHES MINIMUM AND 1.64 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.61 INCHES MINIMUM AND 0.63 INCHES MAXIMUM IN
DIAMETER0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
HEAD STYLEFLAT CHAMFER
HEIGHT0.14 INCHES MINIMUM AND 0.16 INCHES MAXIMUM IN
SPECIAL FEATURESSTYLE - CLEVIS PIN
PART NAME ASSIGNED BY CONTROLLING AGENCYPIN, CLEVIS
END ITEM IDENTIFICATION2355016545325
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D014W431?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D014W431?
D014W431 is a PIN,STRAIGHT,HEADED.
What is the NSN for D014W431?
D014W431 is cataloged in the U.S. Government catalog under NSN 5315-01-731-0232. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D014W431

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.