PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D-60130
D-60130 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN, housing_bore_diameter: 2.504 INCHES MINIMUM AND 2.508 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-966-2290, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D-60130
NSN: 5330-00-966-2290
FSC: 5330
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
housing_bore_diameter2.504 INCHES MINIMUM AND 2.508 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN
NSN5330-00-966-2290
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D-60130 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 2.504 INCHES MINIMUM AND 2.508 INCHES MAXIMUM IN
•
CASE STYLE: RECESSED
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.504 INCHES MINIMUM AND 2.508 INCHES MAXIMUM IN
CASE STYLERECESSED
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN
MATERIALSTEEL CASE
SEAL WIDTH0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
19321Interchangeable
interchangeable cross-reference
interchangeable
60130Interchangeable
interchangeable cross-reference
interchangeable
4730008960837Interchangeable
interchangeable cross-reference
interchangeable
J246Interchangeable
interchangeable cross-reference
interchangeable
247243Interchangeable
interchangeable cross-reference
interchangeable
504272Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D-60130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D-60130?
D-60130 is a SEAL,PLAIN ENCASED.
What parts can replace D-60130?
There are 12 known substitutes for D-60130: 19321, 60130, 4730008960837 and 9 more. Substitute compatibility should be verified for your specific system.
Is D-60130 still available?
D-60130 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D-60130

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026