PartsTable
Technical Data Sheet

D-6/CY12 — CUTTER BIT,TOOL HOLDER

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

D-6/CY12: CUTTER BIT,TOOL HOLDER.

The CUTTER BIT,TOOL HOLDER is a the manufacturer industrial component. Key specifications include shape: SQUARE, material: CARBIDE, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN, special_features: MATERIAL IAW MIL-STD-982 GRADE X-5, unable_to_decode: UNABLE TO DECODE. This part is cataloged in the U.S.

Government catalog under NSN 3455-01-051-0543, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D-6/CY12
NSN: 3455-01-051-0543
FSC: 3455 — Cutting Tools for Machine Tools
CAGE: 64700 — KENNAMETAL INC. (USA)
SPECIFICATIONS
shapeSQUARE
materialCARBIDE
overall_width0.375 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
special_featuresMATERIAL IAW MIL-STD-982 GRADE X-5
unable_to_decodeUNABLE TO DECODE
material_locationOVERALL
overall_thickness0.375 INCHES NOMINAL IN
cutting_edge_finishUNGROUND
specification/standard_data80204-B212.1 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN3455-01-051-0543
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CUTTER BIT,TOOL HOLDER TITLE COMPONENT PN D-6/CY12 MFR CUTTER BIT,TOOL HOLDER
KEY FEATURES
•
OVERALL THICKNESS: 0.375 INCHES NOMINAL IN
•
SHAPE: SQUARE
•
MATERIAL LOCATION: OVERALL
•
SPECIFICATION/STANDARD DATA: 80204-B212.1 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
UNABLE TO DECODE: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
OVERALL THICKNESS0.375 INCHES NOMINAL IN
SHAPESQUARE
OVERALL LENGTH2.500 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL LOCATIONOVERALL
SPECIFICATION/STANDARD DATA80204-B212.1 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
UNABLE TO DECODEUNABLE TO DECODE
SPECIAL FEATURESMATERIAL IAW MIL-STD-982 GRADE X-5
MATERIALCARBIDE
CUTTING EDGE FINISHUNGROUND
SUBSTITUTES & CROSS-REFERENCES 2
B212.1 FIGURE 6 D-6Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
D-6/K21Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D-6/CY12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D-6/CY12?
D-6/CY12 is a CUTTER BIT,TOOL HOLDER.
What parts can replace D-6/CY12?
There are 2 known substitutes for D-6/CY12: B212.1 FIGURE 6 D-6, D-6/K21. Substitute compatibility should be verified for your specific system.
What is the NSN for D-6/CY12?
D-6/CY12 is cataloged in the U.S. Government catalog under NSN 3455-01-051-0543. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D-6/CY12